« Return to Previous Page
Return to Previous Page

Showing 17–32 of 73 results

This high quality, 4-layer PCB  comes complete with all components soldered allowing you to immediately begin experimenting with MMBasic Plus. All that is required is a single USB lead to connect it to a computer (or tablet).

It provides the ultimate in control of external devices and sensors. See video below for an Introduction to MMBASIC Plus.

A TFT LCD Display Panel and PS2 Keyboard can be added to enhance capabilities and make this into a ‘Stand-alone’ device.

Note that the following items are NOT included: TFT LCD Display Panel, Real Time Clock (RTC) module, USB lead, Power Supply, SD card, PS2 Keyboard, any CLICK Modules. You will receive all electronic components pre-soldered, and with the latest version of MMBasic Plus pre-loaded.

A totally unpopulated PCB is also available if you prefer to assemble you own E100 module.


This high quality, 4-layer PCB  comes complete with all SMD components mounted allowing you to easily build your own extremely powerful MicroMite+ Explore 100 TFT Module. It provides the ultimate in control of external devices and sensors. See video below for an overview of it’s potential.

NOTE: The picture shows an unpopulated PCB. You will receive ALL SMDs pre-soldered, and also the latest MMBasic comes pre-loaded.

This PCB requires you to solder just a few through-hole components to complete the module. A totally unpopulated PCB is also available if you prefer to solder you own SMDs.


The MicroMite+ Explore 64 Module adds many new exciting features. Now it is very easy to incorporate a TFT (or OLED) – any size from 0.96″ up to 7″ (with touch!). Incorporates a uSD socket; so just add a uSD card (4Gb – 32Gb) for easy file storage and/or data logging capabilities.



The NanoMite is finally here – a fully functional MicroMite in the footprint of a tiny 8-pin DIL package. Designed to be used in projects where you only need a few I/O pins (maximum 6) but still want to code in the extremely easy, yet powerful, MMBasic.

This is another fantastic design from Mick Gulovsen, a regular contributor to The BackShed Forum, and designer of many other excellent MicroMite products.


This smart looking enclosure is the perfect way to protect your Pi-croMite Zero.


New!

The extremely powerful, yet easy to use, MMBASIC (by Geoff Graham) is now being ported to the Raspberry Pi platform. If you would like to join in the fun, we recommend using this Raspberry Pi Zero W module.

NOTE: Limited to one per customer



5.00

This highly desired new MicroMite MkII offers over double the memory of the original MicroMite; and comes pre-loaded with the latest version of MMBasic.


A high-quality, BLACK, ABS enclosure specifically designed to house the Micromite Keyring Computer.

Choice of optional Silcone Sleeve (available in: Blue, Yellow, or Black). Sleeve fits tightly over base, sides, and around the edges of lid to provide a very professional looking finish.


New!

This Blue Sleeve provides a very professional looking finish for the Micromite Keyring Computer.

Designed for use with the specified Micromite Keyring Case; it fits tightly over the base, sides, and around the edges of the lid.

Also available in: Yellow, or Black.



This tiny USB-to-Serial module allows you to easily connect a MicroMite chip directly to a computer’s USB port.

Designed by us as a high-quality, plug-and-play alternative to the CP2102 module. Fully compatible with ALL MicroMites.


New!

This Blue Sleeve provides a very professional looking finish for the Micromite Keyring Computer.

Designed for use with the specified Micromite Keyring Case; it fits tightly over the base, sides, and around the edges of the lid.

Also available in: Blue, or Black.


£3.50

Simply add a monitor and a keyboard to a MuP-VT and you are ready to program your MicroMite without the need for a computer.

Note: This is the PCB only. All components will need to be purchased separately.



This is a stripped down version of our fully featured 44-pin MicroMite Module. The DIP package provides a convenient way to connect to all 33 I/Os when using a breadboard. Alternatively it may be embedded into your own through-hole PCB design. Mounted on the 68mm x 22mm high quality PCB is a pre-programmed PIC32 micro controller (and all the required capacitors) to make a functioning MicroMite. A 3v3 power source is required along with a USB-to-Serial Module to allow programming & debugging. This is the cheapest way to start exploring the 44-pin MicroMite.
Other components can be added to provide any combination of the following: ICSP connector, reset switch, MPU power LED (Contact Us for prices)


This highly desired new MicroMite MkII offers over double the memory of the original MicroMite; and comes pre-loaded with the latest version of MMBasic.


This 44-pin MicroMite PCB is the latest development from Z-cards (aka Lou & Zonker from the BackShedForum). If you want to experiment with the various hardware capabilities of the MicroMite then this is the perfect PCB to purchase. You will be required to solder SMDs. Alternatively, Contact Us if you would like the MicroMite pre-soldered (and for other part-assembled options).



This plug-in expansion PCB allows you to easily add your own custom circuitry to the excellent 44-pin LCDuMite.


0

Your Cart