- You cannot add "NanoMite Module *ASSEMBLED*" to the cart because the product is out of stock.
MicroMite 2.8″ LCD BackPack *KIT* (28-pin)
The MicroMite LCD BackPack combines a full colour touch-sensitive LCD panel with a low-cost 32-bit microcontroller running MMBASIC.
It packs an incredible amount of power at an amazingly cheap price and opens up a world of possibilities for your next project . . . .
In stock (and by popular demand) is a BackPack Module without TFT.
NOTE: A Version 2 PCB is now available incorporating three main new additions: 1> A built-in USB interface, 2> A built-in firmware programmer, 3> Software controllable (PWM) backlight brightness
This is the MicroMite LCD BackPack KIT as featured in EPE’s May 2017 edition (and in Silicon Chip February 2016).
It comes complete with ALL PCB components required to assemble a fully working module INCLUDING a 2.8″ Touch TFT screen (see below).
NOTE: You will need a USB-to-Serial adaptor to communicate with this module from a computer.
2.8″ Touch TFT module (ILI9341)
Double sided PCB (red finish)
PIC32MX170F256B (MicroMite) loaded with the latest version of MMBASIC
10K resistor (0.6W)
2 x 100nF Ceramic capacitors (X7R)
3 x 10uF Tantalum capacitors (NOTE: Use one for the position marked 47uF on the PCB! This is not an error as any value between 10uF and 47uF can be used)
Tactile Button (red)
28pin MicroMite Socket
23-way Header pin strip
6-way Header pin-strip (NOTE: Leave unsoldered – simply use it to physically connect a PicKit3 to the PCB whenever you need to update MMBASIC!)
14-way Female Socket (2.54mm Pitch)
4 x 12mm Standoffs (M3, Brass, Hex shape, Female/Female)
8 x 6mm Screws (M3, Steel, Pozi-Pan Head)