MicroMite 2.8″ LCD BackPack *KIT* (without TFT)
This version of the MicroMite LCD BackPack kit EXCLUDES the TFT – ideal if you already have your own ILI9341 Touch TFT screen.
NOTE: A Version 2 PCB is now available incorporating three main new additions: 1> A built-in USB interface, 2> A built-in firmware programmer, 3> Software controllable (PWM) backlight brightness
This is the MicroMite LCD BackPack KIT as featured in EPE’s May 2017 edition (and in Silicon Chip February 2016).
It comes complete with all PCB components required to assemble a working module but DOES NOT INCLUDE the 2.8″ Touch TFT screen.
NOTE: You will need a USB-to-Serial adaptor to communicate with this module from a computer.
Double sided PCB (red finish)
PIC32MX170F256B (MicroMite) loaded with the latest version of MMBASIC
10K resistor (0.6W)
2 x 100nF Ceramic capacitors (X7R)
3 x 10uF Tantalum capacitors (NOTE: use one in the place marked 47uF on the PCB – this is not an error as any value between 10uF and 47uF can be used!)
Tactile Button (red)
28pin MicroMite Socket
23-way Header pin strip
6-way Header pin-strip (NOTE: leave unsoldered – simply use to ‘physically connect’ a PicKit to the PCB whenever you need to update MMBASIC!)
14-way Female Socket (2.54mm Pitch)
4 x 12mm Standoffs (M3, Brass, Hex shape, Female/Female)
8 x 6mm Screws (M3, Steel, Pozi-Pan Head)
Be the first to review “MicroMite 2.8" LCD BackPack *KIT* (without TFT)”
There are no reviews yet, would you like to submit yours?